Creality Ender-5 Plus PEI Magnetic Flexible Heated Bed, 3D Printer PEI Printing Plate 377X370X2mm

Product Information

I really love this machine. It has a large build volume, it is upgradable, easy to set up and has quality prints. Sonic Pad (Klipper Screen) CR Touch/BL Touch Silent Board Laser Engraver(Kit) Sprite Direct Extruder Pro WIFIBOX Camera Kit Enclosure For Ender-3S1 Series Filament Sensor: When the filament runs out or disconnected, the Creality Ender-5 Plus 3D Printer will automatically be suspended to ensure the model can be smoothly printed.

AWIN, Sovendus, Meta-Pixel, Google Ads, Microsoft Advertising, creativecdn.com (RTBHouse), Ads Defender Resume printing Function: Creality Ender-5 Plus 3D Printer resume printing while power-off, the motherboard is fully upgraded and supports continuous power failure, which effectively reduces model scrapping caused by power outages. As for the product, when correctly installed and configured (according to the notes above), it is a five star product, I am extremely happy with it. Stable Printing: Unlike Creality Ende-5, Creality Ender-5 Plus 3D Printer is with dual Z-Axis, Stable Z-axis Lead screw drive smoothly and steadily. The movement of the build plate will be more stable.

Customer Reviews

The solution to this problem is to either replace the metal surface of the bed, or fill the concave depression with a heat resistant and conducting material until the bed is flat again. However, this has to be done BEFORE installing this product, or you will only be able to mitigate the problem.

I was thinking of getting one and just adding a magnet too the bottom of the bed too attach and then re calibrating We avoid CO2 emissions wherever we can! Our remaining carbon footprint is compensated through eco-social projects. So I am leaving this review to explain what are the symptoms, why it happens, and how to mitigate or solve it. A bigger build volume, a new bed-leveling probe, improved components: The Creality Ender-5 Plus strives to better the Ender-5 3D printer。Please make sure to aligning the bed rods and it helps, or please moved it up and down and tightened the screw, the lube evened it out. Normally it eventually went away after a few prints. Is there a better glass replacement? Our heated bed is aluminum so do you add magnets or clamp down steel sheets or what? Ultra Large Printing Format: 350X350X400mm | Meet more of your printing requirements, enable more ideas to be printed out, achieve better print results, and a larger print model at a time.

Creality Ender 3, Creality CR-10S Pro, Creality Ender 3 Pro, Creality CR-20 Pro, Creality Ender 5, Creality CR-10S Pro V2, Creality CR-10 V2, Creality Ender 5 Pro, Creality Ender 5 Plus, Creality Ender 3 V2, Creality CR-6 SE, Creality CR-10 V3, Creality Ender 3 Max, Creality CR-10 Smart, Creality CR-10 Smart Pro, Creality Ender 3 S1 Pro, Creality Sermoon D3, Creality K1 I would also recommend going on thingiverse and printing all the "Strain Relief" models for the printer wire loom and hotbed. This is the only reason I did not give this printer 5 stars. You really have to do quite a bit to reduce the strain at the connectors. A gold record I can say. With the correct setting of the print and the bed, it adheres very well to PETG, which is what I work with the most, as well as PLA and others. Much depends, as already mentioned above, on the tested print settings.The glass plate from creality has never been flat and it’s hounded me since day one. My challenge has been to find the right size replacement and in what material. Eventually I did some upgrades such as building my own enclosure, adding a capricorn bowden tube, and all metal extruder. It has drastically improved my PETG prints once I got my E-steps dialed in. I like the finish you get on the side-down face of the glass sheet so while it’s not always possible I do consider it during setup.

Stable Z-axis Lead screw drive smoothly and steady. The movement of the build plate will be more stable. Ender 5 Plus Unboxing Build&Set-UpThis is my very first 3D printer. I must say that it was very easy to assemble along with setting it up for my first print. Don't expect to have wonderful prints right off the bat. Setting up CURA was really easy and I was able to print out a calibration cube. Is it possible to buy just the Flexible plate? I would like a second to allow me to do a faster turn around between prints. When using a glass bed surface, the glass remains exactly flat (minus scratches and such) over time. However, with some low cost printers, such as mine (CR10 v1, which has the exact same dimensions as the v2, so this product fits it), the metal bed, being regularly heated, collapses slightly over time. Not by much, but with fine engineering such as 3D printing, a few fractions of a millimeter are enough for the nozzle to be too high, relatively to the bed, and this can in turn cause problems. Crafted with high-quality components, the Ender-5 Plus guarantees superior print quality and durability. Its sturdy metal parts ensure stability during printing, minimizing vibrations and resulting in smoother prints. The heat-resistant glass platform provides excellent adhesion and heat distribution, ensuring optimal print bed conditions for consistent and reliable results. Trust in the Ender-5 Plus to deliver exceptional prints time after time.