XCP Rust Blocker CLEAR COAT - High Performance Rust Protection Spray 500ml Trigger Bottle

Product Information

Dilute 1 part XCP CLEANER & DEGREASER with up to 10 parts water (select according to strength of cleaning power). XCP GREEN ONE does exactly the same thing as XCP ONE, but it is made from bio-based ingredients that are renewable, sustainable and bio-degradable. XCP Clear Coat is easy to apply from the spray bottle and hangs onto no more grit after rinsing than TechCote. It can also be poured straight into a paint gun’s pot and applied with a compressor. Clear Coat in an aerosol can is extremely easy to use and only missed out on a Best Buy as the bottle is better value. If you don’t mind paying a bit extra, and won’t want to apply it with a compressor, it’s worth the money. Award winning, high performance cleaning & degreasing spray. Water based and biodegradable. Safe to use on metals, paints and coatings. Use it neat as a degreaser, or dilute it for use as a bike wash or general purpose cleaner. Cuts easily through oil, dirt, grease and grime! Available in reusable 1 ltr trigger bottle and in our 5 ltr eco-refill pouch Use as a degreaser ACF-50 can be a little reluctant to come out of the aerosol can on a cold day, so keep it indoors for a while, or put it in some warm water.

Thanks to Skidmarx for supplying the samples of acrylic, which are offcuts from the production of their excellent aftermarket screens. Clear Coat po nanesení a zavadnutí vytvoří měkký, tenký a nelepivý film. Clear Coat bude chránit před rzí a vnějšími vlivy, zatímco povrch bude stále vypadat skvěle a bude odolný vůči nečistotám.

Flat steel plates were cleaned with 99.9% pure isopropyl alcohol, dried and coated with the protectants before being left for 24 hours. Each plate was then coated in fine sand, shaken to dislodge any excess, then rinsed with a hose. However, it’s been out of the scope of my testing to look at lubrication performance – where relevant – and this is a test that’s purely trying to find the best way to stop your motorbike from going rusty… I drilled 2.5mm holes (with a pillar drill for consistency) in all the samples of the three different plastics, then carefully inserted stainless steel M3 self-tapping screws to create stress risers that highlight any incompatibilities between the material and the chemical. I carried out the same test here, leaving the samples in the products for two weeks as, while they’re intended to provide a protective barrier against corrosion on metals, it’s almost impossible to apply them without getting them on the rest of the bike. Even if it’s wiped away, any product will be coating the insides of the bodywork and many other parts of the machine. In the Best Motorcycle Cleaners test I used samples of painted steel, anodised aluminium, ABS plastic, polycarbonate, acrylic and chain O-rings to ensure material compatibility.

In my testing, none of the corrosion protectants I sampled caused any noticeable harm to any of the materials used on motorcycles. Bulldog BDX 01 was one of the big surprises, given that it’s a multi-purpose spray; to have out-performed ACF-50 (when applied in a light coat with a compressor) is very impressive. Keep in mind though that I’m only testing it as a corrosion protectant, and haven’t assessed its lubricity performance. If used solely for rust inhibiting, there are cheaper and more effective products. How often you have to put these on will depend on their performance, but also how often you clean the bike. Optional) Lubricate and/or protect surfaces with your preferred XCP Professional spray, as necessary. Konkurenční výrobky jsou ještě dražší a s těmi levnějšími je spojuje to, že XCP v jeho vlastnostech a užitné hodnotě nepředčí.This isn’t an exhaustive list of corrosion protectants, but it does cover the most popular that were available at the time of testing. As soon as possible I’ll carry out another test, which will include the following:

Ano, máme. Na Youtube a v různých zahraničních auto-moto časopisech najdete bezpočet testů a srovnání, z nichž XCP vždy vyjde jako vítěz v rámci dané kategorie výrobků. Byly prováděny certifikované testy, které výborné vlastnosti XCP potvrdily. Odkazy na testy, porovnání a recenze najdete v XCP Blogua v popisech jednotlivých výrobků. On the plus side any dirt accumulation can be removed with a good wash down, again without seriously diminishing the coatings protection. Hopefully it goes without saying that ALL of these products MUST be kept away from your brake calipers, pads, discs and tyres. Do not apply them to the brake disc carriers either as centripetal force will throw them out onto the disc surface. If you’re applying any of these products with a compressor, be sure to cover your entire wheels first.

These products were all selected based on their claims, or after recommendation by the Bennetts Facebook community, but it’s obvious that those designed specifically as corrosion protectants tended to fare the best in this corrosion test; GT85, for instance, isn’t sold as a corrosion inhibitor but many people use it as such, assuming it’s superior to WD-40 (both products are from the same parent company).

Tradiční antikorozní ochrana v automobilovém průmyslu má obvykle gumový, polyuretanový, voskový, parafínový nebo asfaltovýzáklad. Tato ochrana sice poskytuje silnou, ale těžko odstranitelnou a opravitelnou ochrannou vrstvu. XCP Universal Parts Cleaner is a powerful non-chlorinated, solvent based fast evaporating cleaner and degreasing agent for use on a wide variety of parts and surfaces. It removes dirt, grease, oil and grime.Thanks to trail and adventure parts manufacturer Rally Raid products for supplying the aerosol lids used as sample dishes from their sister company Masplas Mouldings.